Installation Accessories

Provides extraordinary bond strength to ensure the PVC Flooring would not lift once down.

• Quick Dry Time
• Used on Plywood Substrate
• Approximate Coverage 400 - 500 Sq. Ft. / Per Pail
• Compatible with All Valordek Products

Packaging: 2 US Gallon (7.6L) / 5 US Gallon (18.9L)

Solvent Based Winter Grade Adhesive. Compared to the VD 0295 this Adhesive is a lot denser, which makes it easier to work with in the colder months.

• Quick Dry Time
• Used on Plywood Substrate
• Approximate Coverage 350 - 400 Sq. Ft. / Per Pail
• Compatible with Valordek Fuzzy Back Products Only

Packaging: 2 US Gallon (3.8L) / 5 US Gallon (18.9L)

Specific formula Solvent Based Adhesive which is used for the 3ply Smooth Back product only.

• Quick Dry Time
• Used on Plywood Substrate
• Approximate Coverage 400 - 500 Sq. Ft. / Per Pail
• Compatible with Valordek Smooth Back Products Only

Packaging: 2 US Gallon (3.8L) / 5 US Gallon (18.9L)

Water Based Adhesive. Compared to the Contact Cement, this Adhesive only required to be applied to the Plywood Substrate.

• Quick Dry Time
• Used on Plywood Substrate
• Approximate Coverage 350 - 400 Sq. Ft. / Per Pail
• Compatible with Valordek Fuzzy Back Products Only

Packaging: 5 US Gallon (18.9L)

BASF has developed many different MasterSeal products used to prevent water leaks and moisture ingression. MasterSeal NP1 has been developed as a Weather Resistant Product, it will guarantee to last long and be water tight.

• Durable and Flexible (Ensures to be water tight even with joint movement)
• Suitable for all Climates
• Available Colours: Limestone / Tan
• Compatible with All Valordek Products

Packaging: 300ml Tubes / 12 Tubes Per Case

Designed for through wall drainage. The PVC Coating ensures a long-lasting waterproofing protection.

• Weldable PVC Coated Surface
• Dimensions: 4" x 4" x 18"
• 4" Exit Drainage Opening
• Compatible with All Valordek Products

Sold Individually / Optional Front-End Cap

Built to the highest standards to ensure protection to prevent leaks. These drains allow for a smooth flow for the water to exit off the surface of the balcony.

• Weldable PVC Coated Flange
• Dimensions: 8 1/2" Outside Flange x 4 1/4" Hole Diameter x 2 1/4" Exit Pipe
• Compatible with All Valordek Products

Sold Individually

Provides extra protection for emergency drainage in case of any overflows.

• Weldable PVC Coated Flange
• Dimensions: 2" Outflow with 12" Straight Exit Pipe

Sold Individually

Developed for all sorts of Roofing Membranes. The WDD Drain has a sleek Epoxy Coated Finish to its surface, the drain is also equipped with a polyurethane sealant to prevent leaks.

• Dimensions: 8" Outside Flange x 6" Hole Diameter x 2" Exit Pipe
• Aluminum Drain / Epoxy Finish
• Compatible with All Valordek Products

Sold Individually

Provides extra protection for emergency drainage in case of any overflows.

• Aluminum Overflow
• Dimensions: 2" Outflow with 11" Straight Exit Pipe

Sold Individually

Ensures the Vinyl Membrane does not separate over time giving it a permanent waterproof finish on the edge. When using PVC Coated Flashing it does not require PVC Clips to hold the Vinyl together with flashing.

• 24 Gauge Drip Edge PVC Coated
• Flashing Dimensions: 2" x 2" x 96"
• Available Colours: Grey / Beige

Sold Individually

Create a nice sleek finish when wrapped with the Valordek Membrane. Once you have completely wrapped the Flashing and placed the PVC Clip on to the edge, the rain water from the deck will have a smooth flow off the deck away from the fascia board to prevent rotting in the future.

• 30 Gauge Drip Flashing
• Flashing Dimensions: 2" x 2" x 96"
• PVC Clip: Available in Grey / Beige (10' Lengths)

Sold Individually

Aluminum strip used to fasten the Valordek membrane in tight areas where the membrane can't go all the way up the wall. Aluminum Wall Flashing is used to create a smooth transition in instances where there is a gap between the subfloor and wall.

• Powder Coated Mechanical Strip (Colour Matched Screws)
• Dimensions: 1" x 120"
• Available Colours: Grey / Beige
• 30 Gauge Aluminum Wall Flashing: 2" x 2" x 96"

Sold Individually (Screws Included)

Leister has been the leading manufacturer in developing hot air tools for over 65 years.

• 1550-Watt Heating Element / Triac ST 120 Volts
• Includes: 20mm / 40mm Welding Tip
• Accessories: 40mm Pressure Arm Roller, Replacement Elements

Valordek's Hot Air Heat Gun, used to permanently bond two pieces of Valordek PVC Membrane together. Tool has adjustable heat control to allow adjustments.

• Includes: 20mm / 40mm Welding Tip, 40mm Pressure Arm Roller
• Replacement Elements Available

When preparing the surface before laying the Vinyl Membrane it is suggested to sand the entire surface to smooth out any rough patches in the plywood for the best result.

• Dimensions: 7" x 7/8"
• Grit: 24
• Compatible with all Angle Grinders

Sold Individually / Per Box

Self curing polymer modified concrete leveling compound which is used to create a smooth substrate for the Installation of PVC Flooring.

• Dry Powder Like Compound
• Mixed with Water
• Compatible with All Valordek Products

Single Bag: 22lb / 10kg

Premixed latex-based compound which is used to create a smooth substrate for the installation of PVC Flooring. Used to fill in all knot holes, joints and all other imperfections on the substrate.

• Ready to use
• Used on Plywood Substrate
• Compatible with all Valordek Products

Packaging: 2 US Gallon (7.6L)