Vinyl Membranes for Decks in Everett, WA
Everett takes the north Sound's cooler, wetter weather, with waterfront and bluff homes exposed to everything coming off Port Gardner Bay. A vinyl deck membrane is one continuous waterproof sheet — no seams, no fastener holes. North American made, from $2.75 USD/sq ft.
Cooler, wetter, slower to dry
The north Sound runs cooler and wetter than the Seattle metro, which means Everett decks spend more of the year damp and less of it drying out.
North Sound rain
Everett sees a long, cool wet season. Board decks hand that water an entry point at every gap and fastener; a heat-welded membrane gives it none.
Waterfront exposure
Homes above Port Gardner Bay and along the bluff take wind and salt air off the water, driving rain into seams and wall junctions.
Historic neighborhoods
Rucker Hill and the older northwest neighborhoods are full of early-1900s homes with original porches and balconies that have been patched for generations.
Cool damp and moss
Lower temperatures mean surfaces stay wet longer, and moss takes hold. Vinyl doesn't absorb water, so moss sits on top and washes off instead of rooting in.
Two membranes. Built for two jobs.
Valordek bonds directly to your substrate and heat-welds into one continuous waterproof surface. No board gaps, no fasteners through the surface, nothing for water to find.
68mil Fuzzy-Back
The standard for residential balconies and decks over living space. Contact-adhered with heat-welded seams for a fully sealed, walkable waterproof surface.
60mil Smooth-Back
Built for rooftop and amenity decks. PVC flashing on open decks plus heat-welded seams. Class A & C fire rated and Intertek tested.
Vinyl deck membranes across Everett and Snohomish County
Everett runs from the historic homes of Rucker Hill and the northwest neighborhoods down to the waterfront and out into newer Snohomish County subdivisions. The older housing carries original porches, balconies, and stair landings that have seen decades of patching; the newer stock brings decks over garages and living space. Both sit in a cooler, wetter corner of the Sound where surfaces simply don't get many chances to dry.
A deck over an occupied room is a roof, and it has to be waterproofed rather than resurfaced. A vinyl deck membrane is a continuous heat-welded sheet, Intertek tested and code-compliant, so the space below stays dry.
What a vinyl deck membrane actually is
It's a single PVC sheet bonded to your prepared substrate with every seam heat-welded, so the whole deck becomes one waterproof surface. No fasteners pass through it and there are no joints to fail.
A permanent reset for an old deck
Plenty of Everett decks have been re-coated and re-flashed for years. Provided the structure is sound, a membrane bonds over the prepared surface and gives a century-old porch a single permanent waterproof finish instead of another season of chasing leaks.
Made in North America, shipped locally
Valordek membrane is manufactured in Surrey, BC and ships into Washington regularly, so Everett projects stay close to the source for material, samples, and support.
Want a number for your deck? Try the cost calculator or reach out for a quote.
The technical detail
| Specification | Balcony (68mil) | Rooftop patio (60mil) |
|---|---|---|
| Installation | Contact adhesive + heat-welded seams | Adhesive + PVC flashing + heat-welded seams |
| Waterproofing warranty | 15 years | 15 years |
| Fire rating | — | Class A & C |
| Temperature range | -40°F to 176°F | -40°F to 176°F |
| Certification | Intertek tested | Intertek tested |
| Price (membrane only) | $2.75 USD/sq ft | $2.75 USD/sq ft |
A finish for every Everett home
Wood Look, Stone Look, and Classic — all stocked and ready to ship from our Surrey, BC warehouse.
Walnut Plank
Smoke Grey
Marble Beige
River Rock
Grey Stone
Beige StoneValordek on real decks
Valordek's membrane is made in Surrey, BC and ships across British Columbia, Alberta, Saskatchewan, and Washington — with dealers and installers in communities throughout the region.
Explore all service areasCommon questions
What is a vinyl membrane for a deck?
It's a single continuous PVC sheet bonded to your deck substrate, with all seams heat-welded so the surface becomes fully waterproof. Unlike boards or coatings, there are no gaps, joints, or fastener holes for water to get through.
Can a vinyl membrane go over my older Everett porch?
Often, yes. If the structure is sound and the substrate can be prepared properly, the membrane bonds over it for a clean, permanent waterproof finish — a practical fix for the many older porches around Rucker Hill and the northwest neighborhoods. Contact us and we'll assess yours.
Does a vinyl deck membrane handle the north Sound climate?
It's built for it. The membrane is fully waterproof with no seams or fastener holes for rain to find, and it doesn't absorb water, rot, or grow moss into the surface the way wood and composite do.
What do vinyl membranes for decks cost in Everett?
The membrane starts at $2.75 USD per square foot for material. Installed cost depends on deck size, substrate condition, and complexity. Size it with the cost calculator, or reach out for a quote.
Does it work for a balcony over a room?
Yes — that's a core use. A continuous heat-welded membrane fully seals a deck or balcony over living space so water can't reach the room below. The 60mil membrane is Intertek tested and fire rated for that.
Get a vinyl deck membrane in Everett
Tell us about your deck or balcony and we'll connect you with your nearest dealer for samples, pricing, and a quote.