Waterproof Vinyl Decking, Built for Edmonton
Edmonton winters bury a deck in snow for months, then the spring freeze-thaw pries it apart. Valordek is a continuous waterproof vinyl membrane tested from -40°C to 80°C. Made in Canada, stocked for the Edmonton area.
Edmonton weather is brutal on decks
It isn't one thing that destroys an Edmonton deck. It's the full year, hitting it from every direction.
Deep-freeze winters
Edmonton is one of the coldest major cities in Canada. Winter lows routinely sit in the -20s, and extreme-cold warnings below -40°C with wind chill arrive several times a season. Rigid coatings and wood go brittle and crack at those temperatures — flexible PVC stays pliable.
Snow that stays
Unlike Calgary, Edmonton gets no regular chinooks to melt the snowpack mid-winter. Snow accumulates on a deck and sits for months, so every seam, screw hole, and board gap becomes a standing path for meltwater into the structure below.
Spring freeze-thaw
As that deep snowpack finally melts in March and April, repeated freeze-thaw cycles expand and contract every material on the deck. A heat-welded continuous membrane moves with the cycle instead of splitting along a joint.
Long-daylight UV
Near the solstice Edmonton sees about 17 hours of daylight. That intense, long summer sun fades stain and dries out wood fast. UV-stable vinyl holds its colour for the life of the membrane — no annual re-stain.
Two membranes. Built for two jobs.
Valordek bonds directly to your substrate and heat-welds into one continuous waterproof surface. No board gaps, no fasteners through the surface, nothing for meltwater to find.
68mil Fuzzy-Back
The standard for residential balconies and decks over living space. Contact-adhered with heat-welded seams for a fully sealed, walkable waterproof surface.
60mil Smooth-Back
Built for rooftop and amenity decks. PVC flashing on open decks plus heat-welded seams. Class A & C fire rated and Intertek tested.
Serving Edmonton and the surrounding area
Edmonton's housing stock is split between mature neighbourhoods full of aging homes and a fast wave of new development. In established areas like Glenora, Ritchie, Highlands, and Strathcona, the city's infill program has filled lots with skinny homes and duplexes — most with a rear deck or upper balcony that needs to keep water off the space below. On the edges, communities like Windermere, Summerside, Laurel, and neighbouring Sherwood Park and St. Albert keep adding townhomes and condos with balconies built over living space. Every one of them faces the same job: staying watertight through a long, hard freeze.
That matters because the National Building Code treats any deck or balcony over occupied space as a roof — it has to be waterproofed to CGSB 37.54 standards, not just surfaced. Valordek's membranes carry CCMC and Intertek certification confirming they meet code 37.54.95, so an Edmonton balcony over a suite or garage is covered properly, not just covered up.
Why wood and coatings fail here first
A painted or stained wood deck in Edmonton is fighting a losing battle. Water gets into the board gaps and fastener holes, freezes, expands, and works the joints open a little more every cycle. Paint-on and roll-on coatings go brittle in the deep cold and crack along the seams. By a few seasons in, you're re-staining annually or chasing leaks into the ceiling below. A continuous heat-welded vinyl membrane has no gaps, no fasteners through the surface, and no seams to split — it's one sealed sheet.
Built for the Edmonton install season
Contact adhesive needs a dry substrate above 10°C to bond properly, so Edmonton installs run roughly May through September, with early-fall work scheduled around the first cold snaps. The long June and July daylight makes for full installation days. Your dealer can advise on timing and connect you with experienced local installers.
Snow and winter maintenance
Clear snow with a plastic shovel or soft-bristle broom — never a metal blade or ice scraper directly on the membrane. Calcium-chloride de-icers are safe. The membrane stays flexible at -40°C, so foot traffic and snow removal through an Edmonton winter won't crack it the way they crack a coated or wood deck.
Want a number for your deck? Try the cost calculator or reach out for a quote.
The technical detail
| Specification | Balcony (68mil) | Rooftop patio (60mil) |
|---|---|---|
| Installation | Contact adhesive + heat-welded seams | Adhesive + PVC flashing + heat-welded seams |
| Waterproofing warranty | 10 years | 15 years |
| Fire rating | — | Class A & C |
| Temperature range | -40°C to 80°C | -40°C to 80°C |
| Certification | CCMC, code 37.54.95 | Intertek, code 37.54.95 |
| Price (membrane only) | $3.74/sq ft | $3.74/sq ft |
A finish for every Edmonton home
Wood Look, Stone Look, and Classic — all stocked and ready to ship from our Surrey, BC warehouse.
Walnut Plank
Smoke Grey
Marble Grey
River Rock
Grey Stone
Beige StoneValordek on real decks
Valordek's membrane is made in Surrey, BC and ships across British Columbia, Alberta, Saskatchewan, and Washington — with dealers and installers in communities throughout the region.
Explore all service areasCommon questions
Can vinyl decking handle Edmonton's extreme cold?
Yes. Valordek vinyl membranes are rated to -40°C. The flexible PVC formulation stays pliable instead of going brittle the way rigid coatings and wood do, so it holds its waterproofing integrity through Edmonton's deepest freezes and the freeze-thaw cycling each spring.
What does vinyl decking cost in Edmonton?
The membrane starts at $3.74 per square foot for material. Total installed cost depends on deck size, substrate condition, and complexity. You can size your own project with the cost calculator, or reach out for a quote.
Is there a Valordek dealer near Edmonton?
Yes. There's an authorized dealer in Spruce Grove covering the Edmonton metro, and we ship product directly across the region. Contact us and we'll connect you with the nearest dealer for samples, pricing, and installation.
When can it be installed in Edmonton?
Roughly May through September. Contact adhesive needs a dry substrate above 10°C to bond, so installs run through the warm season, with early-fall work scheduled around the first cold snaps.
Can I shovel snow off a vinyl deck?
Yes — use a plastic shovel or soft-bristle broom. Avoid metal blades and ice scrapers directly on the membrane. Calcium-chloride de-icers are safe, and the membrane stays flexible at -40°C so snow removal won't crack it.
Get Valordek in Edmonton
Tell us about your deck or balcony and we'll connect you with your nearest dealer for samples, pricing, and a quote.